Self Balancing Car Kit With Control Module Two Wheeled Chassis Motor Driver DIY

Description

Specification
Package 1 kits: 12CPR two wheel chassis with control module.
Package 2 kits: 360CPR two wheel chasis with control module.
The package dose not include the battery.
1) Modular design with 2-layer structure, easy to install;
2) The upper platform reserves expansion space, which is very suitable for the field of interest development and robot education;
3) The product has a strong balance ability, equipped with photoelectric test module, making the control more easily.
Two wheeled chassis package:
DC Motor Driver
The motor driving chip contains two full bridge drivers, which can drive two DC motors or a two-phase four wire stepping motor at the same time. The logic input part is added with photoelectric isolation module to better protect the controller; the maximum input voltage of the module is 40V, the peak current of single circuit is 3A, lasting for 2A, and the maximum power shall not exceed 25W; the input terminal of the logic terminal adopts standard TTL level control, and is equipped with two enable terminals ENA \ ENB, which are used to allow and prohibit the device to work, and is connected to VCC by default.
Driving voltage: 3-40V
Single drive current: Continuous 2A, peak 3A
Minimum logic input voltage: 3V
Maximum logic input voltage: 7V
Maximum load power: 25W
Working environment (temperature): -25℃-130℃